omphobby-logo

DOWNLOADS


ZMO
OMPHOBBY ZMO
OMPHOBBY_ZMO_Y3_Firmware_D9.zip

MD5: 9d00aaceae502bce8ee447ea99b43e53
Helicopters
OMPHOBBY M2 V3 Pro
OMPHOBBY_M2_V3_PRO_M2V3.012.08.fw.zip

MD5: 58fdcef2d37813c81fb78707fa06450e

IMPORTANT NOTE - OFS3 FIRMWARE UPDATE

M2 EVO MK2 and M2 V3 PRO both use the same OFS3 flight control stack, but differ mechanically and aerodynamically. Therefore, OFS3 firmware releases now comprise two distinct firmware files for the two models, which are identical in functionality, but differ in their baked-in defaults.

⚠️ Ensure the firmware file name matches the model you are flashing the firmware to! Use firmware “M2V3” for an M2 V3 PRO! Use firmware “M2MK2” for an M2 EVO MK2! ⚠️

Failure to flash the correct firmware to your model will lead to sub-par flight performance when resetting parameters, and will set incorrect servo directions when formatting the flight controller. Exercise proper caution when selecting the firmware to flash. OMPHOBBY assumes no responsibility for the consequences of flashing incorrect firmware.

OFS3 M2 V3 PRO Firmware 12.08 Changelog

  • M2 V3 PRO firmware added with appropriate default values and servo directions
  • Fixed an issue that would cause a rare motor RPM drop event when using certain CRSF receivers
  • Swashplate initialization sequence now respects servo reverses
  • Improvements to parameter reset functionality
  • Prepared flight controller for upcoming new app functions
OMPHOBBY M2 EVO MK2
OMPHOBBY_M2_EVO_MK2_M2MK2.012.08.fw.zip

MD5: de942d08d63e85b116121a5ee05a04c2

IMPORTANT NOTE - OFS3 FIRMWARE UPDATE

M2 EVO MK2 and M2 V3 PRO both use the same OFS3 flight control stack, but differ mechanically and aerodynamically. Therefore, OFS3 firmware releases now comprise two distinct firmware files for the two models, which are identical in functionality, but differ in their baked-in defaults.

⚠️ Ensure the firmware file name matches the model you are flashing the firmware to! Use firmware “M2V3” for an M2 V3 PRO! Use firmware “M2MK2” for an M2 EVO MK2! ⚠️

Failure to flash the correct firmware to your model will lead to sub-par flight performance when resetting parameters, and will set incorrect servo directions when formatting the flight controller. Exercise proper caution when selecting the firmware to flash. OMPHOBBY assumes no responsibility for the consequences of flashing incorrect firmware.

OFS3 M2 EVO MK2 Firmware 12.08 Changelog

  • Fixed an issue that would cause a rare motor RPM drop event when using certain CRSF receivers
  • Swashplate initialization sequence now respects servo reverses
  • Improvements to parameter reset functionality
  • Prepared flight controller for upcoming new app functions
OMPHOBBY_M2_EVO_MK2_M2.011.58.fw.zip

MD5: aee3c8d4851de3c6d8fc187e38dbf5f1
  • Improved Self Leveling in Attitude Mode
  • Improved Low Voltage Protection Behavior
  • Applied Auto-Baud to DSM Receivers
OMPHOBBY M4 MAX
OMPHOBBY_ESC_FW_85A_B2-2.zip

MD5: fe268b62bc2cdd97d58d386df8f681ba
  • Added Mikado VBar Control Telemetry
  • Added automatic telemetry protocol detection
  • Enabled autorotation bailout by default (refer to M4/M4 MAX manuals for usage)
  • Simplified motor timing selection
  • Bug fixes and improvements
OMPHOBBY M4
OMPHOBBY_ESC_FW_65A_V1_B3-4.zip

MD5: fe268b62bc2cdd97d58d386df8f681ba
  • Added Mikado VBar Control Telemetry
  • Added automatic telemetry protocol detection
  • Enabled autorotation bailout by default (refer to M4/M4 MAX manuals for usage)
  • Simplified motor timing selectionc
  • Bug fixes and improvements